Liqui-Cel

Operating Information



Start-Up Guides

Product Description
MiniModule® Start-up Guide

Start-up guidelines for Parallel flow debubbling contactors

MiniModule® Start-up Guide for Adding Gases

Start-up Guide for Adding Gases with the 1.7 x 10 MiniModule®

0.5x1 and 0.75x1 MicroModule® Start-up Guide

MicroModule® Start-up Guide

1x3 and 2x6 SuperPhobic® Start-up Guide

Start-up guidelines for SuperPhobic® 1 x 3 and 2 x 6-inch products

Liqui-Cel® Extra-Flow and SuperPhobic Start-up Guide

Start-up guidelines for Extra-flow 2.5 x 8, 4 x 13, 4 x 28, 8 x 20, 8 x 40, 8 x 80, 10 x 28, and 14 x 28 inch products



Operating Guides

Product Description
Full Operating Guide for all Membrane Contactors

This guide includes P&ID's, pressure and temperature guidelines, recommended controls and a troubleshooting guide.

Operating Guide - 8x20 Decarbonator Skid

This guide includes P&ID's, pressure and temperature guidelines, recommended controls and a troubleshooting guide.

Inlet Water & Sweep Gas Guidelines

This document provides guidelines for inlet water and sweep gas conditions that may help prevent fouling of the membrane surface or scaling which can negatively impact performance.

Assembly Guidelines: 4 x 28 316L SS Housings

This guideline explains assembling a membrane cartridge inside of a SS 4 x 28 - inch housing.

Assembly Guidelines: 8x20 Stainless Steel

This guideline explains how to change out the membrane cartridge inside of an 8 x 20 Stainless Steel contactor.

Assembly Guidelines: 8x40 and 8x80

Assembly & Disassembly Guide for 8 x 40 and 8 x 80 High Pressure Membrane Contactors

Assembly Guidelines: 10x28 FRP Housings

This guideline explains assembling a membrane cartridge inside of a 10-inch FRP housing with a v-band clamp.

Assembly Guidelines: 10 x 28 316L SS Housing with ANSI/JIS Connection

This guideline explains assembling a membrane cartridge inside of a 316L SS 10-inch housing with ANSI/JIS connections with Integrated End Caps.

Assembly Guidelines: 10 x 28 316L SS Housing with ANSI RF Flange Connections

This guideline explains assembling a membrane cartridge inside of a 316L SS 10-inch housing with ANSI raised face flange connections.

Assembly Guidelines: 10 x 28 316L SS Housing

This guideline explains assembling a membrane cartridge inside of a 316L SS 10-inch housing.

Assembly Guidelines: 14-inch Housings

This guideline explains assembling a membrane cartridge inside of a 14-inch housing.



Cleaning Guides

Product Description
Cleaning Guide

This is a reference for cleaning all of our membrane contactors.



Chemical Resistance Guides

Product Description
Chemical Resistance Guide

This is a reference for chemical compatibility for all of our membrane contactors.



 
 
  • © 2017 3M Company. 3M Industrial Group | Separation and Purification Sciences Division
  • Legal
  • Privacy
  • Site Map